Product technical data

Input form

thermocouple

B 400 ~ 800℃

S 0 to 1600 ° C

K 0 ~ 1300℃

E 0 ~ 800 ° C

T 0 ~ 400 ° C

Thermal resistance

Pt100-200 ~ 500℃

Cu50-50 ~ 150℃

linearity

0 to 10mA DC

4 to 20mA DC

0 to 5V DC

0 to 5V DC

Output form

control

Two-position: insensitive area range O. 1% ~ 10.0%, relay contact output.

Time ratio: Cycle 1 ~ 200 seconds ratio with 0.1% ~ 400.0% relay contact output.

Two-position PID: Cycle 1 ~ 200 seconds ratio with 0.1% ~ 400.0% integral time: O ~ 3600 seconds

Differential time: 0 ~ 3600 s relay contact output.

Continuous PID: proportional band 0.1% ~ 400.0% Integral time: O ~ 3600 seconds

Differential time: 0 ~ 3600 seconds 0 ~ 100mA (4 ~ 20mA) DC output.

Three-position PID: adjustable from 0.0 to 10% in insensitive zone

Relay contact output

Relay operation range 0.1 ~ 10%

Relay operation cycle 1 ~ 200 seconds

Valve position feedback signal: 0 ~ 100mA (4 ~ 20mA) DC

0 ~ 1KΩ resistance signal

Logical output: 24V DC 20 mA

Solid state relay output: Capacity 2A 250V AC

alarm

Two groups of relay contact output can be used for upper and lower limit alarm.

A process alarm can be used as an insurance device for the system, that is, once the measured value is greater than the process alarm set value, the output value of the instrument is cut to the output lower limit.

Process quantity output

0 to 100mA DC, 4 to 20mA DC, 0 to 5DC, 1 to 5VDC.

Power supply

Switching power supply: 86 ~ 264V AC 50Hz±5%

Power consumption: 6VA

Supply transmitter power: 24V DC, 50 mA