Product Description: TEM The electronic regulator series is a full-scale electronic automatic detection and adjustment instrument. It can be used with various thermocouples, thermal resistors and DC signal transmitters to measure and control temperature and other parameters. If the instrument is equipped with an alarm device, it can alarm the measured object over the limit. Therefore, the instrument is widely used in plastics, printing and dyeing, food processing, metal processing, medical, petroleum, chemical, electronic and other industrial sectors and other need to adjust the temperature occasions.

Two-position adjustment: switch midpoint error is not greater than ± 1.5% FS

The switching difference is no more than 1%

Time proportion adjustment: the proportion of 3% ~ 10%

On-off cycle 20± 5S

The set point error is not greater than. 1.5% FS

Alarm: Alarm range: adjustable beyond 5% of the set value

Warning range: less than 2% FS

Contact capacity of relay: AC 220V 3A (resistive)

Power source: AC 220V 50Hz

Input rated resistance: thermocouple 100Ω No adjustment is required inside

The resistance value of each wire is equal and less than 2.5Ω

Power consumption: about 2.5W

Ambient temperature: 0 ~ 50℃, relative humidity: 30 ~ 85%

Dimensions: 96× 96× 150mm

Weight: about 600g